國立臺灣大學機械工程學系

首頁系所成員教授專任教授楊士進

系所成員

教授

專任教授

兼任教授

名譽/退休教授

職員

助教室

楊士進

中文姓名：楊士進

職稱：教授

任職期間：

英文姓名：Shih-Chin Yang

Email：scy99@ntu.edu.tw

聯絡電話：02-3366-2702

傳真： 02-2363-1755

辦公室：機械館621室

影響區域：創新、能源

研究所組別：系統控制組

實驗室：馬達技術實驗室 (機械館717室)

個人網頁

個人簡介

個人簡介
研究領域
教學課程
研究計畫
研究著作

學歷

美國威斯康辛大學麥迪遜分校, 機械工程博士, 2011
國立臺灣大學, 機械工程碩士, 2007
國立中興大學, 機械工程學士, 2005

經歷

2011-2015, Research Engineer, Texas Instruments Motor Lab, Dallas, Texas
2008-2011, Research Assistant, Wisconsin Electrical Machines and Power Electronics Consortium, University of Wisconsin-Madison, Wisconsin

榮譽

107年中華民國第三十八屆電力工程研討會論文發表榮獲優秀論文獎
106年科技部電力學門優秀年輕學者計畫 (專題計畫: 極高速超音速馬達系統開發)
105年科技部電力學門新進人員研究成果獎 (專題計畫: 電動機之線上狀況監控系統及容錯控制)
The 2016 IEEE ECCE Conference Thursday Afternoon Paper Winner
The 2011 IEEE IAS-PELS Student Travel Award
The 2010 IEEE IAS Industrial Drive Committee First Prize Paper Award
The 4th HIWIN Master Thesis Award- Machine Tool Award

馬達驅動

馬達設計

電力電子

風力發電

數位控制

電子學

電動機之線上狀況監控系統及容錯控制 (104年科技部新進人員計劃)

期刊論文 (Journal Papers)：Corresponding Author(通訊作者)*

S.-C. Yang*, Magnet Fault Diagnosis for Permanent Magnet Synchronous Motor Based on Flux Estimation With PWM Voltage Measurement , IEEE Transactions on Industrial Electronics, 2024 (SCI)
S.-C. Yang*, Reaction Wheel Design for Precise Attitude Control of CubeSats Using Flexible PCB Windings and Halbach Magnet Array , IEEE Transactions on Aerospace and Electronic Systems, vol. 60, no. 3, 2024 (SCI)
S.-C. Yang*, Torque Measurement and Control for Electric-Assisted Bike Considering Different External Load Conditions , Sensors, 2023 (SCI)
S.-C. Yang*, Integration of Measurement Vector Insertion With Discontinuous PWM to Improve Saliency-Based Sensorless Drive Position Estimation , IEEE Transactions on Power Electronics, vol. 37, no. 12, 2022 (SCI)
S.-C. Yang*, The Influence of Non-Sinusoidal Inductance on Saliency-Based Position Estimation for Permanent Magnet Machine , IEEE Access, vol. 10, 2022 (SCI)
S.-C. Yang*, High-Resolution Permanent Magnet Drive Using Separated Observers for Acceleration Estimation and Control , Sensors, 2022 (SCI)
S.-C. Yang*, Sensorless LC Filter Implementation for Permanent Magnet Machine Drive Using Observer-Based Voltage and Current Estimation , Sensors, 2021 (SCI, Rank: 34.4% (95/276) in ENGINEERING, ELECTRICAL & ELECTRONIC)
S.-C. Yang*, Full-Region Sensorless BLDC Drive for Permanent Magnet Motor Using Pulse Amplitude Modulation With DC Current Sensing , IEEE Transactions on Industrial Electronics, vol. 68, no. 11, 2021 (SCI, Rank: 10.1% (28/276) in ENGINEERING, ELECTRICAL & ELECTRONIC)
S.-C. Yang*, Saliency-Based Permanent Magnet Machine Position Sensorless Drive Using Proposed PWM Injection and Shunt-Based Current Sensing for Position Estimation , IEEE Transactions on Industrial Electronics, vol. 68, no. 7, 2021 (SCI, Rank: 10.1% (28/276) in ENGINEERING, ELECTRICAL & ELECTRONIC)
S.-C. Yang*, Permanent Magnet Motor Design for Satellite Attitude Control With High Torque Density and Low Torque Ripple , IEEE Access, vol. 8, 2020 (SCI, Rank: 34.3% (94/273) in ENGINEERING, ELECTRICAL & ELECTRONIC)
S.-C. Yang*, Design of High-Speed Permanent Magnet Motor Considering Rotor Radial Force and Motor Losses , Energies, 2020 (SCI)
S.-C. Yang*, Implementation Issues of Flux Linkage Estimation on Permanent Magnet Machine Position Sensorless Drive at Low Speed , IEEE Access, vol. 7, 2020 (SCI, Rank: 34.3% (94/273) in ENGINEERING, ELECTRICAL & ELECTRONIC)
S.-C. Yang*, Digital Implementation Issues on High Speed Permanent Magnet Machine FOC Drive Under Insufficient Sample Frequency , IEEE Access, vol. 7, 2020 (SCI, Rank: 34.3% (94/273) in ENGINEERING, ELECTRICAL & ELECTRONIC)
S.-C. Yang*, Sensorless vibration harmonic estimation of servo system based on the disturbance torque observer , IEEE Transactions on Industrial Electronics, vol. 67, no. 3, 2020 (SCI, Rank: 6.5% (18/273) in ENGINEERING, ELECTRICAL & ELECTRONIC)
S.-C. Yang*, Phase Voltage Measurement for Permanent Magnet Machine Sensorless Drive Using Controller Capture Modulator , IEEE Transaction on Industrial Electronics, vol. 67, No. 1, 2020 (SCI, Rank: 5.8% (4/87) in ENGINEERING, MULTIDISCIPLINARY)
S.-C. Yang*, Permanent-Magnet Machine Flux and Torque Response Under the Influence of Turn Fault , IEEE Transaction on Industrial Electronics, vol. 67, No. 1, 2020 (SCI, Rank: 5.8% (4/87) in ENGINEERING, MULTIDISCIPLINARY)

國際會議論文 (International Conference Papers)

S.-C. Yang*, Adaptive Disturbance Input Decoupling for Galvo Motor based on Resonance Frequency Estimation , 2023 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, Ultra-Light Reaction Wheel with Dual-layer rotor and Single-side Halbach Magnet Array for CubeSat , 2023 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, A CUSUM-based Adaptive Bearing Fault Features Tracking Method for RUL Estimation , 2023 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, Design of Dual Three-Phase Synchronous Reluctance Starter Generator for Aircraft , 2023 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, Motor Torque Control Of Electric Assist Bike Considering External Resistances , IECON 2023-49th Annual Conference of the IEEE Industrial Electronics Society
S.-C. Yang*, Novel four-phase spherical reaction wheel motor with vector control for three-DOF CubeSat attitude determination and control system , IECON 2023-49th Annual Conference of the IEEE Industrial Electronics Society
S.-C. Yang*, Uniform and Localized Magnet Demagnetization Detection of Permanent Magnet Motor based on On-line Flux Estimation , 2022 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, Design of Satellite Reaction Wheel with Flexible PCB Windings for Angular Momentum Optimization , 2022 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, Sensorless Disturbance Rejection for High-Precision Permanent Magnet Motor Motion System , 2022 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, RC Filter Free Flux-based Sensorless BLDC Drive for Permanent Magnet Motor using Pulse Amplitude Modulation , 2022 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, Torque Ripple Reduction for BLDC Permanent Magnet Motor Drive using DC-link Voltage and Current Modulation , 2021 IEEE International Future Energy Electronics Conference (IFEEC)
S.-C. Yang*, Disturbance Rejection of the Galvano Scanner System using Sensorless Acceleration Control and Disturbance Torque Compensation , 2021 IEEE International Future Energy Electronics Conference (IFEEC)
S.-C. Yang*, Sensorless Acceleration Estimation and Acceleration Feedback Control to Improve the Disturbance Torque Rejection on Galvano Motor System , 2021 IEEE Energy Conversion Congress and Exposition (ECCE) (First Prize Paper)
S.-C. Yang*, Transient Hall Sensor Fault Compensation for Hall-Based Field Oriented Control Motor Drive , 2021 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, Model Reference Adaptive Control of Pulse Amplitude Modulated PM Motor Drive for High Power Transport Drone Applications , 2020 IEEE Energy Conversion Congress and Exposition (ECCE)
S.-C. Yang*, Saliency-Based Position Sensorless Drive for Permanent Magnet Machine with Low Cost Shunt Resistor Current Sensing using Modified PWM Voltage Injection , 2020 IEEE Energy Conversion Congress and Exposition (ECCE)

專利

S.-C. Yang, Permanent Magnet Motor with Sinusoidal Back-EMF Waveform for Position Sensorless Drive, US Patent, Nov 2012
S.-C. Yang, T. Suzuki, R.D. Lorenz, and T.M. Jahns, Permanent Magnet Motor with Stator-Based Saliency for Position Sensorless Control, US Patent, Sep 2009
S.-C. Yang, Position Sensorless Drive System for Permanent Magnet Motors with Spatial Saliencies, US Patent filed, Nov 2012
D. Magee and S.-C. Yang, Initial Position Detection and Velocity Estimation Algorithm for Salient Permanent Magnet Motors, US Patent Filed, May 2013