教育背景︰
美國布朗大學 機械系 博士 1982.9 ~ 1984.7
美國布朗大學 應用數學系 碩士 1982.9 ~ 1983.6
美國布朗大學 機械系 碩士 1980.9 ~ 1982.6
國立台灣大學 農業工程系 學士 1974.9 ~ 1978.6

經歷︰
美國布朗大學 研究助理 1980.9 ~ 1984.8
美國布朗大學 博士後研究員 1984.9 ~ 1985.8
台灣大學機械系 副教授 1985.8 ~ 1989.7
台灣大學機械系 教授 1989.8 ~ 今

1. 提升光纖光柵感測器的感測能力及解調系統並應用於三維結構動態問題和工業量測(1/3) ，主持人，計畫期間：17/08/01~18/07/31，委任單位：科技部。
The Developement of Grating-based Fiber Sensing System and Its Application in Three-Dimensional Structure Dynamics and Industrial Problems (1/3), PI; Project period: 17/08/01~18/07/31, Organization: Ministry of Science and Technology.
2. 數位影像相關法影像分析技術之量測精度提升及應用於跨領域量測技術 (2/3) ，主持人，計畫期間：17/08/01~18/07/31，委任單位：科技部。
The Development of Increasing Precision for Digital Image Correlation Method and Its Applications in Multi-field Problems (2/3), PI; Project period: 17/08/01~18/07/31, Organization: Ministry of Science and Technology.
3. 理論解析，數值計算以及實驗量測探討薄壁結構承受撞擊的動態和挫曲特性(2/3) ，主持人，計畫期間：17/01/01~17/12/31，委任單位：科技部。
Analytical, Numerical and Experimental Study of Dynamics and Buckling of Thin-Walled Solids under Longitudinal Impact (2/3), PI; Project period: 17/01/01~17/12/31, Organization: Ministry of Science and Technology.
4. 壓電與磁致伸縮材料動態特性和耦合問題理論分析及實驗量測(3/3) ，主持人，計畫期間：16/08/01~17/07/31，委任單位：國科會。
Theoretical Analysis and Experimental Measurement for Dynamic Characterisitcs of Piezoelectric and Magnetostrictive Materials (3/3), PI; Project period: 16/08/01~17/07/31, Organization: National Science Council.
5. 數位影像相關法影像分析技術之量測精度提升及應用於跨領域量測技術 (1/3) ，主持人，計畫期間：16/08/01~17/07/31，委任單位：科技部。
The Development of Increasing Precision for Digital Image Correlation Method and Its Applications in Multi-field Problems (1/3), PI; Project period: 16/08/01~17/07/31, Organization: Ministry of Science and Technology.
6. 理論解析，數值計算以及實驗量測探討薄壁結構承受撞擊的動態和挫曲特性(1/3) ，主持人，計畫期間：16/01/01~16/12/31，委任單位：科技部。
Analytical, Numerical and Experimental Study of Dynamics and Buckling of Thin-Walled Solids under Longitudinal Impact (1/3), PI; Project period: 16/01/01~16/12/31, Organization: Ministry of Science and Technology.
7. 微奈米材料的力學特性與破壞研究(1/1)，主持人，計畫期間：15/01/01~15/12/31，委任單位：台灣大學(拔尖計畫)。
The Mechanical and Fracture Behavior of Materials in Micro-Nano Scale (1/1), PI; Project period: 15/01/01~15/12/31, Organization: National Taiwan University (Excellent Research Projects)
8. 壓電與磁致伸縮材料動態特性和耦合問題理論分析及實驗量測(2/3) ，主持人，計畫期間：15/08/01~16/07/31，委任單位：國科會。
Theoretical Analysis and Experimental Measurement for Dynamic Characterisitcs of Piezoelectric and Magnetostrictive Materials (2/3), PI; Project period: 15/08/01~16/07/31, Organization: National Science Council.
9. 高靈敏光纖光柵感測系統的研發及其應用於智能結構和耦合問題之探討(3/3)，主持人，計畫期間：15/08/01~16/07/31，委任單位：國科會。
High Sensitivity Grating-based Fiber Sensing System and the Application in Smart Structures and Coupled Problems T (2/3), PI; Project period: 15/08/01~16/07/31, Organization: National Science Counci
10. 建構數位影像相關法於全場量測及影像分析技術之建立(3/3) ，主持人，計畫期間：15/08/01~16/07/31，委任單位：國科會。
The Development of digital image correlation method for Full Field Measurement and Its Applications (3/3), PI; Project period: 15/08/01~16/07/31, Organization: National Science Counci.
11. 微奈米材料的力學特性與破壞研究(1/1)，主持人，計畫期間：14/01/01~14/12/31，委任單位：台灣大學(拔尖計畫)。
The Mechanical and Fracture Behavior of Materials in Micro-Nano Scale (1/1), PI; Project period: 14/01/01~14/12/31, Organization: National Taiwan University (Excellent Research Projects)
12. 功能梯度材料的動態,強韌性及穩定性問題的研究(3/3),主持人，計畫期間：14/08/01~15/07/31，委任單位：國科會。
Dynamics, Stability and Robustness of Functionally Graded Materials (3/3), PI; Project period: 14/08/01~15/07/31, Organization: National Science Council.
13. 高靈敏光纖光柵感測系統的研發及其應用於智能結構和耦合問題之探討(2/3)，主持人，計畫期間：14/08/01~15/07/31，委任單位：國科會。
High Sensitivity Grating-based Fiber Sensing System and the Application in Smart Structures and Coupled Problems T (2/3), PI; Project period: 14/08/01~15/07/31, Organization: National Science Counci.
14. 建構數位影像相關法於全場量測及影像分析技術之建立(2/3) ，主持人，計畫期間：14/08/01~15/07/31，委任單位：國科會。
The Development of digital image correlation method for Full Field Measurement and Its Applications (2/3), PI; Project period: 14/08/01~15/07/31, Organization: National Science Counci.
15. 壓電與磁致伸縮材料動態特性和耦合問題理論分析及實驗量測(1/3) ，主持人，計畫期間：14/08/01~15/07/31，委任單位：國科會。
Theoretical Analysis and Experimental Measurement for Dynamic Characterisitcs of Piezoelectric and Magnetostrictive Materials (1/3), PI; Project period: 14/08/01~15/07/31, Organization: National Science Council.
16. 新型先進壓電致動器與感測器動態特性分析及量測(3/3)，主持人，計畫期間：13/08/01~14/07/31，委任單位：國科會。
Theoretical Analysis and Experimental Measurement for Dynamic Characterisitcs of Advanced Piezoeletric Actuators and Sensors (3/3), PI; Project period: 13/08/01~14/07/31, Organization: National Science Counci.
17. 微奈米材料的力學特性與破壞研究(1/1)，主持人，計畫期間：13/01/01~13/12/31，委任單位：台灣大學(拔尖計畫)。
The Mechanical and Fracture Behavior of Materials in Micro-Nano Scale (1/1), PI; Project period: 12/08/01~12/12/31, Organization: National Taiwan University (Excellent Research Projects)
18. 功能梯度材料的動態,強韌性及穩定性問題的研究(2/3),主持人，計畫期間：13/08/01~14/07/31，委任單位：國科會。
Dynamics, Stability and Robustness of Functionally Graded Materials (2/3), PI; Project period: 13/08/01~14/07/31, Organization: National Science Council.
19. 高靈敏光纖光柵感測系統的研發及其應用於智能結構和耦合問題之探討(1/3)，主持人，計畫期間：13/08/01~14/07/31，委任單位：國科會。
High Sensitivity Grating-based Fiber Sensing System and the Application in Smart Structures and Coupled Problems T (1/3), PI; Project period: 13/08/01~14/07/31, Organization: National Science Counci.
20. 建構數位影像相關法於全場量測及影像分析技術之建立(1/3) ，主持人，計畫期間：13/08/01~14/07/31，委任單位：國科會。
    The Development of digital image correlation method for Full Field Measurement and Its Applications (1/3), PI; Project period: 13/08/01~14/07/31, Organization: National Science Counci.
21. 建構影像處理、形貌檢測與物件辨識關鍵技術於製程自動化精密量測，主持人，計畫期間：13/01/01~13/11/31，委任單位：工研院機械所。
    Development of algorithms for vision-based technique in manufacture automation applications, PI; Project period: 13/01/01~13/11/31, Organization: ITRI.
22. 新型先進壓電致動器與感測器動態特性分析及量測(2/3)，主持人，計畫期間：12/08/01~13/07/31，委任單位：國科會。
    Theoretical Analysis and Experimental Measurement for Dynamic Characterisitcs of Advanced Piezoeletric Actuators and Sensors (2/3), PI; Project period: 12/08/01~13/07/31, Organization: National Science Counci.
23. 微奈米級光纖光柵動態位移和應變量測系統的研發及其應用(3/3)，主持人，計畫期間：12/08/01~13/07/31，委任單位：國科會。
    The Development of Grating-based Fiber Sensing System with Micir-Nano Sensitivity on Dynamic Displacement and Strain (3/3), PI; Project period: 12/08/01~13/07/31, Organization: National Science Council.
24. 壓電板殼元件三維面內及面外耦合的動態特性分析及量測(3/3)，主持人，計畫期間：12/08/01~13/07/31，委任單位：國科會。
    Theoretical Analysis and Experimental Measurement for Three-Dimensional Coupled In-plane and Out-of-plane Motions of Piezoelectric Plate and Shell (3/3), PI; Project period: 12/08/01~13/07/31, Organization: National Science Council.
25. 功能梯度材料的動態,強韌性及穩定性問題的研究(1/3),主持人，計畫期間：12/08/01~13/07/31，委任單位：國科會。
    Dynamics, Stability and Robustness of Functionally Graded Materials (1/3), PI; Project period: 12/08/01~13/07/31, Organization: National Science Council.

1. Chan-Yi Liao, Yi-Chuang Wu, Ching-Yuan Chang and Chien-Ching Ma,(2017), “Theoretical Analysis Based on Fundamental Functions of Thin Plate and Experimental Measurement for Vibration Characteristics of a Plate Coupled with Liquid”, Journal of Sound and Vibration, Vol. 394, pp. 545–574. (SCI, EI)
2. Yi-Chuang Wu, Yu-Hsi Huang and Chien-Ching Ma, (2017), “Theoretical analysis and experimental measurement of flexural vibration and dynamic characteristics for piezoelectric rectangular plate”, Sensors and Actuators A: Physical, Vol. 264, pp. 308–332. (SCI, EI)
3. Ching-Yuan Chang and Chien-Ching Ma, (2017), “Increasing the Computational Efficient of Digital Cross Correlation by a Vectorization Method”, Mechanical Systems and Signal Processing, Vol. 92, pp. 293–314. (SCI, EI)
4. Lyudmyla Tokova, Anatoliy Yasinskyy and Chien-Ching Ma (2017), “Effect of the Layer Inhomogeneity on the Distribution of Stresses and Displacements in an Elastic Multilayer Cylinder”, Acta Mechanica, Vol. 228, pp. 2865–2877. (SCI, EI)
5. Yuriy Tokovyy, Anatoliy Chyzh and Chien-Ching Ma, (2017), “An analytical solution to the axisymmetric thermoelasticity problem for a cylinder with arbitrarily-varying thermomechanical properties”, accept to publish in Acta Mechanica. (SCI, EI)
6. Yu. V. Tokovyy and Chien-Ching Ma, (2017), “Three-Dimensional Elastic Analysis of Transversely-Isotropic Composites”, Journal of Mechanics, Vol. 33, pp. 821-830. (SCI, EI)
7. Hwa-Chun Wang, Kuo-Chih Chuang and Chien-Ching Ma (2017), “Experimental study of active vibration control for suppressing impact or moving disturbance-induced vibrations with Polyvinylidene Fluoride and fiber Bragg grating sensors”, accept to publish in Sensors and Actuators A: Physical. (SCI, EI)
8. Chan-Yi Liao , Chien-Ching Ma, (2016), “Vibration Characteristics of Rectangular Plate in Compressible Inviscid Fluid”, Journal of Sound and Vibration, Vol. 362, pp. 228–251. (SCI, EI)
9. Kuo-Chih Chuang, Kang-Che Huang, Hong-Cin Liou and Chien-Ching Ma, (2016), “Investigation of Transient Behaviors of a Cantilever Plate Based on Impact Loading History Detection Using Polyvinylidene Fluoride (PVDF) Films”, IEEE Sensors, Vol. 16, No. 6, pp. 1565–1574. (SCI, EI)
10. Kuo-Chih Chuang, Chien-Ching Maand Chun-Yao Wang, (2016), “Free-edge Sensor Placement for Identifying Vibration Modes of Structures Subjected to Impact Loadings Using Fiber Bragg Gratings”, Structural Control and Health Monitoring, Vol. 23, pp. 1350-1365. (SCI, EI)
11. Kuo-Chih Chuang, Chien-Ching Maand Hwa-Chun Wang, (2016), “Simultaneous measurement of dynamic displacement and strain in a single fiber using a coarse wavelength division multiplexing- and fiber Bragg grating filter-based sensing system”, Applied Optics, Vol. 55, No. 9, pp. 2426-2434. (SCI, EI)
12. Kuo-Chih Chuang, Chien-Ching Maand Chun-Yao Wang, (2016), “Simultaneous measurement of dynamic displacement and strain in a single fiber using a coarse wavelength division multiplexing- and fiber Bragg grating filter-based sensing system”, Sensors and Actuators A: Physical, Vol. 247, pp. 65–74. (SCI, EI)
13. Yuriy Tokovyy and Chien-Ching Ma, (2016), “Axisymmetric Stresses in an Elastic Radially-Inhomogeneous Cylinder under Length-Varying Loadings”, ASME Journal of Applied Mechanics, Vol. 83, No. 11, pp. 111007. (SCI, EI)
14. Yi-Hsien Lin, Yi-Shyong Ing and Chien-Ching Ma,(2015), “Two-dimensional Transient Analysis of Wave Propagation in Functionally Graded Piezoelectric Slabs Using the Transform Method”, International Journal of Solids and Structures, Vol. 52, pp. 72–82. (SCI, EI)
15. Yu. V. Tokovyy and Chien-Ching Ma, (2015), “Analytical solutions to the axisymmetric elasticity and thermoelasticity problems for an arbitrarily inhomogeneous layer”, International Journal of Engineering Science, Vol. 92, pp. 1-17. (SCI, EI)
16. Liang-Chih Chen, Ching-Yuan Chang, Wei-Chen Lee and Chien-Ching Ma* (2015), “Full-field Measurement of Deformation and Vibration using Digital Image Correlation”, Smart Science, Vol. 3, No. 2, pp. 80-86.
17. Yu. V. Tokovyy and Chien-Ching Ma, (2015), “An Analytical Solution to the Three-Dimensional Problem on Elastic Equilibrium of an Exponentially-Inhomogeneous Layer”, Journal of Mechanics, Vol. 31, pp. 545-555. (SCI, EI)
18. Kuo-Chih Chuang,Chien-Ching Maand C.-K. Chang, (2014), “Determination of Dynamic History of Impact Loadings Using Polyvinylidene Fluoride (PVDF) Films”, Experimental Mechanics, Vol. 54, pp. 483–488. (SCI, EI)
19. Kuo-Chih Chuang, Hong-Cin Liou and Chien-Ching Ma, (2014), “Investigation of Polyvinylidene Fluoride (PVDF) Films in Identifying High-frequency Vibration Modes of Flexible Plates”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 61, no. 6, pp. 1047-1058. (SCI, EI)
20. Yu-Hsi Huang,Chien-Ching Maand Zheng-Zhi Li, (2014), “Investigations on Vibration Characteristics of Two-layered Piezoceramic Disks ”, International Journal of Solids and Structures, Vol. 51, pp. 227–251. (SCI, EI)
21. Yu. V. Tokovyy,Yu. Lozynskyy and Chien-Ching Ma, (2014), “Two-Dimensional Thermal Stresses and Displacements in an Arbitrarily Inhomogeneous Elastic Layer”, Applied Mechanics and Materials, Vol. 627, pp. 141-144. (SCI, EI)
22. Gwo-Shyang Hwang, , Ding-Wei Huang and Chien-Ching Ma, (2014), “Numerical Study on Reflection Spectra of an Apodized Fiber Bragg Grating Subjected to Strain Gradients”, Procedia Engineering, Vol. 79, pp. 631-639.
23. Chien-Ching Maand Ching-Yuan Chang, (2013), “Improving Image-quality of Interference Fringes of Out-of-plane vibration using Temporal Speckle Pattern Interferometry and Standard Deviation for Pizoelectric Plates”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 60, no. 7, pp. 1412-1423. (SCI, EI)
24. Chien-Ching Maand Ching-Yuan Chang, (2013), “Qualitative and quantitative analysis of Surface-acoustic-wave-based ultraviolet photodetectors”, Journal of Applied Physics, Vol. 114, 064911. (SCI, EI)
25. Chien-Ching Maand Yi-Tzu Chen, (2013), “Heat Conduction Analysis of Nonhomogeneous Functionally Graded Three-Layer Media”, Computers, Materials, & Continua, Vol. 36, no. 2, pp.177-201. (SCI, EI)
26. Ching-Yuan Chang, Chien-Ching Ma, Kuo-Cheng Huang and Shih-Feng Tseng (2013), “A Rapid Inspection Method for Measuring Interior Tilt and Decenter in Singlet Lens”, Applied Optics, Vol. 52, No. 4, pp. 70-81. (SCI, EI)
27. Yi-Hsien Lin and Chien-Ching Ma(2013), “Theoretical analysis of transient wave propagation in the band gap of phononic system”, Interaction and Multiscale Mechanics: an International Journal, Vol. 6, No 1, pp. 15-29.
28. Kuo-Chih Chuang, Shih-Hao Lin, Chien-Ching Maand Rong-Hua Wu, (2013), “Application of a Fiber Bragg Grating-based Sensing System on Investigating Dynamic Behaviors of a Cantilever Beam under Impact or Moving Mass Loadings”, IEEE Sensors, Vol. 13, No. 1, pp. 389-399. (SCI, EI)
29. Yu. V. Tokovyyand Chien-Ching Ma, (2013), “Three-Dimensional Temperature and Thermal Stresses Analysis of an Inhomogeneous Layer”, Journal of Thermal Stresses, Vol. 36, pp. 790-808. (SCI, EI)

國際會議論文 (International Conference Papers)：

1. Chan-Yi Liao, Chien-Ching Ma, 2016, “Transient Behavior of a Cantilever Plate Subjected to Impact Loading: Theoretical Analysis, Numerical Simulation and Experimental Measurement” The 5th Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2016), Shanghai, China.
2. Ching-Yuan Chang, Chien-Ching Ma, Wan-Hsuan Chou and Ching-Rong Lee, 2016, “Experimental Measurement of Nano-deformation and in Situ Strain using Nanoindentation, Picoindentation and Digital Image Correlation” The 19th World Conference on Non-Destructive Testing (WCNDT 2016), Munich, Germany.
3. Ching-Yuan Chang, Liang-Chih Chen, Chien-Ching Ma, Fu-Pen Chiang, 2016, “Direct Measurement of Strain and Blood Flow in Heart using Image” The 17th International Conference on Experimental Mechanics (ICEM 17), Rhodes, Greece.
4. Chien-Ching Ma, 2015, “Applications of Digital Image Correlation Technique in the Measurement of Deformation of Solids for Multi-Scale and Multi-Field Problems ” 7th International Symposium on Precision Mechanical Measurement ( ISPMM2015 ), Xia’men, China. (Invited Keynote)
5. Ching-Yuan Chang , Chien-Ching Ma, 2015, “Using Digital Image Correlation for Full-field Measurement of Carbon Fiber Composite under tensile test ” 7th International Symposium on Precision Mechanical Measurement ( ISPMM2015 ), Xia’men, China.
6. Ching-Yuan Chang, Chien-Ching Ma , 2015, “Measuring displacement field and strain field of a strain gauge using digital image correlation ” International 12 th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2015), Taipei, Taiwan.
7. Ching-Yuan Chang, Chien-Ching Ma , 2015, “Measuring Full-Field Deformation and Vibration Using Digital Image Correlation ” the Fourteenth International Federation for the Promotion of Mechanism and Machine Science World Congress (IFToMM 2015 World Congress), Taipei, Taiwan。
8. Chien-Ching Ma, Ching-Yuan Chang and Wan-Hsuan Chou, 2015, “Full-field Measurement of Carbon Fiber Composite under Tensile Test using Digital Image Correlation” International Conference on Advances in Composite Materials and Structures (CACMS 2015), Istanbul, Turkey.
9. Chan Yi Liao, Chien Ching Ma, 2014, ‘’Theoretical Analysis and Experimental Measurement for Resonant Vibration of a Plate Coupled with a Compressible Fluid”,  4th International Conference on Applied Physics and Mathematics (ICAPM 2014), Singapore
10. C.Y. Chang, C.C. Ma, and C. Y. Chang, 2014, “Applications of Digital Image Correlation Technique in Multi-scale Measurements for Multi-field Problems,” International Conference on Computational and Experimental Engineering and Sciences (ICCES), invited keynote speaker and co-chair, ICCES1420140227034, Changwon, South Korea.
11. K.C. Huang, C.C. Ma, 2014, “The Transient Wave Propagation Measurement on Three Dimensional Solid Using Short Period Fiber Bragg Gratings Sensor” 2014 International Conference on Computational & Experimental Engineering and Sciences (ICCES 2014), Changwon, Korea.
12. C.Y. Chang, C.C. Ma, and C. Y. Chang, 2014, “Application of Digital Image Correlation Technique in Multi-scale Measurements with Large Deformation,” The 20th European Conference on Fracture (ECF20), Trondheim, Norway.
13. C.Y. Chang, C.C. Ma, and C. Y. Chang, 2014, “Applications of Digital Image Correlation Technique in Multi-scale Measurements for Multi-field Problems,” The Seventh Taiwan-Japan Workshop on Mechanical and Aerospace Engineering, Taipei, Taiwan, invited keynote speaker.
14. Chien-Ching Ma and Yi-Chuang Wu, 2014, “Vibration Analysis and Experimental Measurement for Coupled Out-of-Plane and In-Plane Motions of Pizoelectric Thick Plates Based on Mindlin Theory” The Fourth Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS), Nara, Japan, invited keynote speaker.
15. L. Tokova, A. Yasinskyy, Y. Tokovyy and Chien-Ching Ma, 2014, “Effect of the interlayer properties on thermal stress distributions in elastic multilayer nonhomogeneous cylinders” The Fourth Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS), Nara, Japan.
16. Yasinskyy, Y. Tokovyy and Chien-Ching Ma, 2014, “Elastic stress and displacement in anisotropic nonhomogeneous solids” The Fourth Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS), Nara, Japan.
17. Y.C. Wu and C.C. Ma, 2013, “Vibration Analysis For Piezoelectric Thick Plate Based on Mindlin Theory” International Conference on Computation & Experimental Engineering & Science 2013 (ICCES, 2013), Hilton Bellevue, America (Seattle).
18. Chan Yi Liao, Chien Ching Ma, 2013, ‘’The Vibration Characteristics of a Rectangular Plate in Compressible Invisicid Fluid” 3rd International Conference on Advanced Measurement and Test (AMT2013), Xiamen, China.
19. K.C. Huang, C.C. Ma, 2013, “The Transient Responses of Cantilever Beams from Experimental Measurement and Analytical Result by Timoshenko Beam Theory” 2013 3rd International Conference on Advanced Measurement and Test (AMT 2013), Xiamen, China.
20. Yuriy Tokovyy, C.C. Ma, 2013, “Three Dimensional Thermal Stresses in a Solid Elastic Cylinder of Finite Length” 2013 10th International Congress of Thermal Stresses, Nanjing, China.
21. Ching-Yuan Chang, Ching-Ying Chang, Chien-Ching Ma, 2013,  “Measurement of In-Plane Deformation Using Image Correlation for Thermoelectric Chips”, 2013 International Conference of Materials and Mechanical Science, Sanya, China.
    

國內會議論文 (Domestic Conference Papers)：

1. 陳冠瑋，馬劍清，” 懸臂薄板部分浸泡於流體中的流固耦合問題之振動特性理論分析與實驗量測”，2016，中國機械工程學會第三十三屆全國學術研討會(CSME 33) ， 新竹，工研院。
2. 廖展誼，馬劍清，” 矩形平板耦合流體受動態外力作用之暫態波傳探討”，2016，中華民國航太學會學術研討會(2016 AASRC Conference)，高雄。
3. 廖展誼，馬劍清，”考慮阻尼效應的懸臂板承受動態撞擊之暫態波傳理論解析、數值計算和實驗量測” ，2016，中華民國力學學會第四十屆全國力學會議，新竹，交大。
4. 張敬源，馬劍清，周宛萱，”應用數位影像相關法定量量測列車於地震波激振下之脫軌現象”，2016，第11屆海峽兩岸計量學術研討會，中壢，中原大學。
5. 陳亮至，張敬源，馬劍清，”建構立體數位影像相關法並運用於結構靜態與動態三維變形量測與檢測”，2016，第18屆非破壞檢測技術研討會，高雄，中油。
6. 龔瑞清，許詠荏，馬劍清，”應用光纖光柵於高速內藏式主軸及工具機的動態特性、溫升以及變形之精密量測”，2016，2016 Taiwan AOI Forum & Show，新竹，交大。
7. 彭柏勳，陳亮至，劉光晏，張敬源，馬劍清，”應用數位影像相關法於鋼筋與混凝土材料試驗及土木結構變形之精密量測”，2016，第七屆海峽兩岸四地高校師生土木工程監測與控制研討會，台北，國家地震中心。
8. 彭柏勳，張敬源，馬劍清，“應用數位影像相關法於精密平台之運動特性及變形量測”， 2015全研科技對位平台創意應用實作類論文競賽，高雄，義大天悅飯店。
9. 陳亮至，張敬源，馬劍清，“建構單一相機立體數位影像相關法應用於高速動態全場微米等級變形量測”，2015 鈦思科技MATLAB&Simulink技術論文競賽，新竹，喜來登飯店。
10. 彭柏勳，許詠荏，李冠德，“應用數位影像相關法及光纖光柵感測器於高速主軸動態特性之精密量測”，2015第一屆旭泰科技論文獎高速主軸創新應用實作類競賽，台中，日月潭教師會館。
11. 吳柍蓁，馬劍清，“振膜、導音管及調音布對於揚聲器系統動態特性的影響分析與量測”，2015第六屆美律電聲論文獎，台中，裕元花園酒店。
12. 吳亦莊，馬劍清，“高階剪切形變理論應用於厚板三維振動之動態特性解析與探討”，2015中華民國力學研討會，台北，海洋大學。
13. 廖展誼, 馬劍清, 2015, "Investigating Transient Behavior of Cantilever Plate Subjected to Impact Loading by Theoretical Analysis, Numerical Calculation and Experimental Measurement", 2015中華民國航太學會學術研討會(2015 AASRC Conference), 虎尾, 台灣。
14. 廖展誼, 馬劍清, 2015, "Theoretical Analysis for Vibration Characteristics of Cantilever Plate Immersed in Fluid", 中國機械工程學會第三十二屆全國學術研討會(CSME 32), 高雄, 台灣。
15. 周宛萱，張敬源，馬劍清，“建構高精度數位影像相關法並應用於土木結構動態系統及奈米材料微系統的變形量測”，2014第十七屆非破壞檢測技術研討會暨台灣非破壞檢測協會年會，台中，金典酒店。
16. 吳亦莊，馬劍清，“高階剪切形變理論應用於厚板三維振動之動態特性解析與探討”，2014中華民國力學學會年會暨第38屆全國力學會議，基隆，海洋大學。
17. 張敬源，周宛萱，馬劍清，梁智翔，郭信堯，吳志成，“應用數位影像相關法於碳纖維複合材料拉伸破壞的變形量測”，2014中國機械工程學會第31屆全國學術研討會暨103年度年會，台中，逢甲大學。
18. 廖展誼，馬劍清，“流固耦合問題之水下矩形薄板系統的動態特性理論分析和實驗量測”，2014中國機械工程學會第31屆全國學術研討會暨103年度年會，台中，逢甲大學。
19. 陳亮至，張敬源，馬劍清，“數位影像相關法於全場應變與振動之量測開發”，2014中國機械工程學會第31屆全國學術研討會暨103年度年會，台中，逢甲大學。
20. 黃康哲，王華均，馬劍清 ，“布拉格光纖光柵多點動態量測的技術開發 ”，中國機械工程學會第三十屆學術研討會，宜蘭，宜蘭大學。
21. 張敬源，劉泓嶔，馬劍清，張彥中，2013年，“  應用數位影像相關法量測機械手臂之運動軌跡及振動 ”，中國機械工程學會第三十屆學術研討會，宜蘭，宜蘭大學。
22. 廖展誼, 馬劍清, 2013, "The Vibration Characteristics of a Piezoelectric Circular Plate Coupled with Compressible Fluid", 中國機械工程學會102年年會暨第30屆全國學術研討會(CSME 30), 宜蘭, 台灣。
23. 李正智，吳亦莊，馬劍清，黃育熙，2013年，“應用Mindlin厚板理論解析壓電雙晶圓板耦合問題之動態分析與能量擷取的實驗量測”， 2013中華民國航太學會學術研討會，台北淡水，淡江大學。
24. 吳亦莊，馬劍清，2013年，“Mindlin理論應用於壓電厚板三維振動之動態特性解析與探討”， 中華民國力學學會第三十七屆全國力學會議，新竹，清華大學。
25. Gwo-Shyang Huang, Ding-Wei Huang and C.C. Ma, 2013, “Numerical Study on Reflection Spectra of an Apodized Fibde Bragg Grating Subjected to Strain Gradients”, The 37th National Conference on Theoretical and Applied Mechanics (NCTAM, 2013), Hsin-Chu, Taiwan.

專書章節(Book Chapters) ：

1. Yuriy V. Tokovyy , Bohdan M. Kalynyak and Chien-Ching Ma, (2014), “Nonhomogeneous Solids: Integral Equations Approach”, Encyclopedia of Thermal Stresses, R.B. Hetnarski (Ed.), pp. 3350–3356. ISBN: 978-94-007-2738-0, Springer, Dordrecht, The Netherland.
2. Chien-Ching Ma and Ching-Yuan Chang, (2016), “Contribution: Application of Digital Image Correlation Method in the Measurement of Deformation for Multi-scales and Multifields Problems”, Mechanics of Materials, Chun-Hway Hsueh, Krishan K Chawla and Nikhilesh Chawla (Ed.), accept for publication, Springer, Dordrecht, The Netherland.

專利 (Patents) ：

1. 陳文翔，劉浩澧，黃彥棟，馬劍清，蔡偉博，施文彬，戴子安，2011，”人工括約肌系統”中華民國發明專利第351271號，專利期間: 民國100年11月1日 至117年3月30日。
2. Wen-Shiang Chen, Hao-Li Liu, Yen-Tung Huang, Chien-Ching Ma, Wei-Bor Tsai, Wen-Pin Shih, Chi-An Dai, “Artificial Sphincter System”, US Patent No. US 7955389 B2, Date of Patent: June 7, 2011.
3. Chien-Ching Ma, Ching-Yuan Chang, Kuo-Cheng Huang, Shih-Feng Tseng, “Lens Measuring Device and Method Applied Therein”, US Patent No. US 7969563 B2, Date of Patent: June 28, 2011.
4. 馬劍清，張敬源，2014，” 影像處理系統及其方法”中華民國發明專利第461650號，專利期間: 民國103年11月21日 至121年4月16日。
5. 馬劍清，張敬源，2015，”影像前處理方法及系統”中華民國發明專利第479448號，專利期間: 民國104年4月1日 至121年7月5日。

得獎紀錄 (Honors)：

1. 臺大終身特聘教授
2. 美國機械工程學會會士(ASME Fellow)
3. 中華民國機械工程學會會士(Fellow)
4. 中華民國力學學會會士(Fellow)
5. 九十八年度中華民國力學學會『孫芳鐸教授力學獎章』得主
6. 國科會第一級主持人（民國95－96年）
7. 九十五年度臺大工學院宗卓章先生獎座
8. 九十四年度臺大工學院宗卓章先生獎座
9. 中國工程師學會九十三年度傑出工程教授獎
10. 中國機械工程學會九十三年度服務貢獻獎
11. 中國機械工程學會九十二年度傑出工程教授獎
12. 國科會特約研究員
13. 國科傑出研究獎三次
14. 碩士研究生王華均同學榮獲一百零二年度中國機械工程學會碩士學位論文獎第二名
15. 徐雪維同學榮獲中國工程師學會學生分會102年度工程論文競賽機械組金牌獎
16. 吳亦莊同學榮獲力學學會舉辦之一百零二年度學生論文競賽固力材料組第一名
17. 張景媖同學榮獲2013全研科技論文獎碩士組論文競賽金研獎
18. 張景媖同學榮獲2013上銀科技機械論文獎佳作
19. 廖展誼同學榮獲2014航太學術研討會論文競賽第三名
20. 趙浚瑜同學榮獲第2014五屆美律電聲論文獎電聲工程特別獎
21. 陳亮至同學榮獲2014全研科技兩岸大專組創意設計競賽金研獎
22. 周宛萱同學榮獲2014非破壞檢測技術研討會論文競賽第一名
23. 張敬源博士及陳亮至同學榮獲2014 MATLAB & Simulink台灣區程式設計挑戰大賽第一名
24. 吳亦莊同學榮獲力學學會舉辦之一百零四年度學生論文競賽固力材料組第一名
25. 廖展誼同學榮獲2015航太學會舉辦之學術研討會榮獲最佳論文獎
26. 吳柍蓁同學榮獲第2015五屆美律電聲論文獎電聲工程特別獎
27. 彭柏勳同學、許詠荏同學及李冠德同學榮獲2015 第一屆旭泰科技論文獎高速主軸創新應用實作之旭泰金獎
28. 陳亮至同學榮獲2015 MATLAB & Simulink論文競賽第一名（最佳論文獎）
29. 廖展誼同學榮獲力學學會舉辦之一百零五年度學生論文競賽固力材料組第一名
30. 洪國彭同學榮獲第2016五屆美律電聲論文獎電聲工程特別獎
31. 龔瑞清同學、許詠荏同學及李冠德同學榮獲2016 第二屆旭泰科技論文獎高速主軸創新應用實作之旭泰金獎
32. 陳亮至同學榮獲2016非破壞檢測技術研討會論文競賽第二名
33. 龔瑞清同學、許詠荏同學及李冠德同學榮獲2016第五屆中興大學『精密工具機與自動化技術』專題實作競賽暨程泰集團「精密工具機與自動化技術」研究生組第一名
34. 龔瑞清同學、許詠荏同學榮獲2016第一屆自動光學檢測設備聯盟「AOI 創新獎」第一名
35. 王盛儀同學、黃右年同學榮獲2016第六屆全研科技論文獎對位平台創意實作類銀研獎
36. 龔瑞清同學、王盛儀同學及黃右年同學榮獲2017 第三屆旭泰科技論文獎高速主軸創新應用實作之旭泰金獎
37. 龔瑞清同學、王盛儀同學及黃右年同學榮獲2017第六屆中興大學『精密工具機與自動化技術』專題實作競賽暨程泰集團「精密工具機與自動化技術」研究生組第二名
38. 龔瑞清同學榮獲106年度中技社科技創意獎學金
39. 吳亦莊同學榮獲力學學會舉辦之一百零六年度學生論文競賽固力材料組第二名