奈米螺旋碳管合成及元件研製－總計畫：奈米螺旋碳管合成及元件研製，主持人，計畫期間：2007/8/1～2010/7/31，委託單位：國科會。

(Synthesis of Carbon Nanocoil and Development of Carbon Nanocoil Devices, project director, period: 2007/8/1～2010/7/31, NSC)

奈米螺旋碳管合成及元件研製－子計畫一：奈米螺旋碳管致動器之研製，主持人，計畫期間：2007/8/1～2010/7/31，委託單位：國科會。

(Development of Carbon Nanocoil Actuator, project director, period: 2007/8/1～2010/7/31, NSC)

奈米碳管應變感測器，主持人，計畫期間：2006/8/1～2007/10/31，委託單位：國科會。

(Carbon Nanotube Strain Sensors, project director, period: 2006/8/1～2007/10/31)

一維奈米碳管/線合成，奈米複合結構及可調式CMOS奈米管振盪器研製－總計畫：奈米複合結構及可調式CMOS，主持人，計畫期間：2004/8/1～2007/10/31，委託單位：國科會。

(1D Carbon Nanotube and Nanowire Synthesis, Nano-Composites Fabrication and Tunable CMOS Carbon Nanotube/Nanowire Oscillator: 2004/8/1～2007/10/31, NSC)

一維奈米碳管/線合成，奈米複合結構及可調式CMOS奈米管振盪器研製－子計畫二：奈米碳管機電量子性能研究，主持人，計畫期間：2004/8/1～2007/10/31，委託單位：國科會。

(Carbon Nanotube/Nanowire Electromechanical Quantum Characterization, project director, period: 2004/8/1～2007/10/31, NSC)

奈米液滴壓電致動產生器－總計畫：奈米液滴壓電致動產生器，主持人，計畫期間：2003/8/1～2006/7/31，委託單位：國科會。

(Nano-Droplet Generator Driven by Piezoelectric Actuator, project director, period: 2003/8/1～2006/7/31, NSC)

奈米液滴壓電致動產生器－子計畫二：奈米液滴壓電致動產生器－製程、組裝與測試之研究，主持人，計畫期間：2003/8/1 ～2006/7/31，委託單位：國科會。

(Nano-Droplet Generator Driven by Piezoelectric Actuator-Subproject, project director, period: 2003/8/1～2006/7/31, NSC)

1. Su, C.-C.; Chen, T.-X.; Chang, S.-H. ”Compressive Strength Enhancement of Vertically Aligned Carbon Nanotube Forests by Constraint of Graphene Sheets,” Materials, 2017, 10, 206.
2. Chi, P.; Li, Y.; Su, C.; Chang, S., “Improving the compressive strength of carbon nanotube turfs by adding iron nanowires to the nanotube core,” IEEE Transactions on Nanotechnology, Vol. 14, pp. 806-809, 2015
3. Yan-Rui Li, Chih-Chung Su, Wen-Jin Lin and Shuo-Hung Chang, “Piezoelectric Sensor to Measure Soft and Hard Stiffness with High Sensitivity for Ultrasonic Transducers,” Sensors, Vol.15, pp. 13670-13679, 2015
4. Su, Chih-Chung; Huang, Chie-Lin; Chang, Shuo-Hung, “Fabrication of aligned carbon nanocoil thermal sensor with a high temperature coefficient of electrical resistance at 25 to 100 0C,” IEEE Transactions on Nanotechnology, Vol. PP, Issue 99, 2015
5. Kuan-Ting Lin, Yu-Jen Chen, Jian-Yu Hsieh, Shuo-Hung Chang, Ying-Jay Yang, Jung-Tang Huang, and Shey-Shi Lu, Gold Plated Carbon Nanotube Bundle Antenna for Millimeter-Wave Applications,” IEEE Electron Device Letters, Vol. 35, No. 3, pp. 378-380, March 2014
6. Chih-Chung Su, Chen-Hung Li, Neng-Kai Chang, Feng Gao and Shuo-Hung Chang, “Fabrication of High Sensitivity Carbon Microcoil Pressure Sensors,” Sensors, Vol.12, pp. 10034-10041, 2012
7. C.C. Su, Tyng Liu, N.K. Chang, B.R. Wang, S.H. Chang, “Two dimensional carbon nanotube based strain sensor,” Sensors and Actuators A: Physical, Vol.176, pp.124-129, 2012
8. Chih-Chung Su, Shuo-Hung Chang, 2011, “Comparison of the efficiency of various substrates in growing vertically aligned carbon nanotube carpets,” Carbon, Vol.49, pp. 5271-5282, 2011 (SCI-4.504, 2009)
9. J. Y. Yen, L. Wang, Shuo-Hung Chang, H. Y. Lin, 2011, “Longitudinal stitching of sub-micron periodic fringes on a roller," Microelectronic Engineering, Vol.88, pp. 3235-3243, 2011 (SCI-1.488, 2009)
10. Chih-Chung Su, Shuo-Hung Chang, 2011, “Effective growth of vertically aligned carbon nanotube turfs on flexible Al foil,” Materials Letters, Vol.65, pp. 2700-2702, 2011 (SCI-1.94, 2009)
11. Changhong Cao, Alex Reiner, Chunhui Chung, Shuo-Hung Chang, Imin Kao, Robert V. Kukta, Chad S. Korach, 2011 “Buckling initiation and displacement dependence in compression of vertically aligned carbon nanotube arrays,” Carbon, Vol.49, pp. 3190-3199, 2011 (SCI-4.504, 2009)
12. Chih-Chung Su, Shuo-Hung Chang, 2011,“Radial growth of carbon nanocoils on stainless steel wires coated with tin particles using chemical vapor deposition from acetylene, “Materials Letters, 65(7)1114-1116, 2011 (SCI-1.940, 2009)

國際會議論文 (International Conference Papers)：

1. C. C. Su, T. K. Chang, S. T. Tsai, F. L. Yang, W. P. Shih, S. H. Chang “A mechanical analysis of woodpecker pecking mechanism to shock-absorbing systems,” 2015 IFToMM World Congress, October 25-30, 2015, Taipei, Taiwan
2. Y. R. Li, C. C. Su and S. H. Chang “Thermoelectric property of vertically aligned carbon nanotube carpets,” 2015 IEEE 10th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), April 7-11, 2015, Xi'an, China
3. Chih-Chung Su, Wei-Lin Hsu, I-Chun Chen and Shuo-Hung Chang, “A suppressed active vibration mechanism using a model reference adaptive control,” 3rd IFToMM Asian Conference On Mechanism and Machine Science, July 9-10, 2014, Tianjin, China
4. Chih-Chung Su, Wei-Ru Cheng and Shuo-Hung Chang, “Fabrication of BGA solder balls using vertically aligned carbon nanotube forests,” 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, November 12-15, 2013, Taipei, Taiwan
5. Chih- Chung Su, Chi-Nung Huang, Yu-Jen Chen and Shuo-Hung Chang, “Improve efficiency of ultrasonic transducer by wave reflection method,” 3rd IFTOMM International Symposium on Robotics and Mechatronics, October 1-4, 2013, Singapore
6. Henry Huang, Chi Nung Huang, Chih Lun Chin and Shuo Hung Chang, “Development of a Three-DOF Spherical Ultrasonic Motor Supported by Electro-Magnets,” 2nd IFToMM ASIAN Conference on Mechanism and Machine Science, November 7-10, 2012, Tokyo, Japan
7. Chung Han Yang, Wen Jin Lin, and Shuo Hung Chang, “High sensitive stiffness sensor for ultrasonic dental tool,” The 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 11-14, 2012, Kaohsiung, Taiwan
8. S. H. Ku, Tyne Liu, Z. D. Li, J. T. Hung, Y. S. Tsai, S. H. Chang, “A Swimming Robot Using Carbon Nanocoils,” 2nd IFToMM International Symposium on Robotics and Mechatronics, Shanghai, China , 3-5 November, 2011.
9. J. D. Li, Y. S. Tsai, C. C. Su, Y. J. Chen, T. Liu, and S. H. Chang, “Fabrication of Nanometer Scale Carbon Nanocoils and Its Interaction with Electrical-Magnetic Wave,” Cross Strait Advanced Manufacturing Conference, Si-Chuan, China, 17-21 Oct, 2011.
10. C. C Su, Tyng Liu, and S. H. Chang,” Characterization of carbon based nanometer scale helix coils," International Conference on Mechanical Engineering and Technology, Paris, 27-29 July, 2011.
11. C. C. Su, T. Liu, C. L. Tsai, and S. H. Chang, “A Monolithic Six Degrees-of-freedom Piezo-Micro-Positioner,” 13th World Congress in Mechanism and Machine Science, Guanajuato, México, 19-25 June, 2011.
12. C. C. Su, J. L. Tsai, and S. H. Chang, “Synthesis of Uniform Carbon Micro-coils by Using Hybrid catalyst of Fe Thin Film and SnO2 Powder,” 2011 6th IEEE-NEMS conference, Kaoshiung, Taiwan, Feb. 23-28, 2011.

國內會議論文 (Domestic Conference Papers)：

1. 蘇志中, 謝孟倫, 李彥叡, 張所鋐 “填鐵奈米碳管叢之散熱研究,” 中國機械工程學會第33屆全國學術研討會, 工業技術研究院, Dec. 03-04, 2016
2. 蘇志中, 曾瓅, 李彥叡, 張所鋐 “水氣輔助之高靈敏度石墨烯感測器,” 中國機械工程學會第33屆全國學術研討會, 工業技術研究院, Dec. 03-04, 2016
3. 蘇志中, 葉冠禹, 李彥叡, 張所鋐 “可撓式奈米碳管叢應變感測器,” 2016精密工程技術研討會, 國立清華大學, Nov. 11, 2016
4. 蘇志中, 張庭寬, 蔡昇達, 陳致中, 楊馥菱, 施文彬, 張所鋐 “啄木鳥頭部隔震效果之仿生研究,” 第十七屆全國機構與機器設計學術研討會, 國立勤益科技大學, Nov. 14, 2014
5. 蘇志中, 洪瑞聰, 莊祐銘, 陳昱仁, 張所鋐 “填鐵奈米碳管叢感應電流之磁電效應研究,” 第十七屆奈米工程暨微系統技術研討會, 逢甲大學, Aug. 22-23, 2013
6. 呂宗諺, 李彥叡, 張所鋐 “波動方式提升超音波換能器效能之研究,” 第十五屆全國機構與機器設計學術研討會, 南台科技大學, Dec. 2, 2012
7. 金志倫, 黃棋農, 張所鋐 “壓電驅動球型三自由度超音波馬達之設計,” 第十四屆全國機構與機器設計學術研討會, 國立中央大學, Nov. 4, 2011
8. 古昇灝, 陳任銘, 陳昱仁, 劉霆, 張所鋐 “磁場遙控奈米螺旋碳管運動,” 中國機械工程學會第二十八屆全國學術研討會, 國立中興大學, Dec. 10-11, 2011
9. 金志倫, 黃棋農, 張所鋐 “壓電驅動球型三自由度超音波馬達之設計,” 第十四屆全國機構與機器設計學術研討會, 國立中央大學, Nov. 4, 2011
10. 蘇志中, 陳昱仁, 簡建軒, 張所鋐, “奈米碳螺旋線圈對於電磁波吸收性質之研究,” 第十五屆奈米工程暨微系統技術研討會, 國立台北科技大學, Sept.6~7, 2011

專利 (Patents)：

1. 張所鋐、蘇志中、洪瑞聰, “感應式奈米碳管叢發電裝置及其感應方法,” 2015
2. 王倫、陳永彬、饒智昇、張所鋐、張哲豪, “製作週期性圖案的步進排列式干涉微影方法及其裝置,” 2013
3. 張所鋐、江舜傑, “一種具有預壓元件之三自由度球狀超音波馬達裝置,” 2013
4. 顏家鈺、張所鋐、陳正宏、陳聯聖, “步進排列式干涉微影方法與系統,” 2013
5. 張所鋐、魏炳誠、張能凱, “一種生長奈米螺旋碳管之方法,” 2012
6. 呂學士、楊英杰、張所鋐、謝建宇、林冠廷、汪濤、蘇志中、李振宏、張能凱, “電磁波吸收元件及電磁波吸收裝置,” 2012

專書 (Books)：

1. “光機電系統整合概論”, 編輯-伍秀菁、汪若文、林美吟, 國家實驗研究院儀器科技研究中心出版, July 2005

得獎紀錄 (Honors)：

1. Outstanding Professor Award, Chinese Society of Mechanical Engineers (2005)

研究計畫 (Research Projects) :

1. 石墨烯大面積均勻合成與電性修飾之研製(105-2221-E-002-151-)，主持人，計畫期間： 2016/08/01~2017/07/31，委託單位：科技部。
2. 石墨烯電子元件於檢測極低濃度(pg/ml)生物標記的定點照護系統--總計畫兼子計畫一：石墨烯合成及其機電特性量測與轉印技術之研製，主持人，計畫期間：2013/08/01~ 2014/07/31，委託單位：國科會。(Point-of Care System with Graphene Electronic Device for detecting ultralow concentration (pg/ml) biomarker, period: 2013/08/01~ 2014/07/31, NSC)
3. 奈米螺旋碳管、填鐵奈米碳管製程及機電元件研製--總計畫：奈米螺旋碳管、填鐵奈米碳管製程及機電元件研製，主持人，計畫期間：2010/8/1～2013/7/31，委託單位：國科會。(Synthesis of carbon nanocoils and Fe-filled carbon nanotubes、characterization and devices development, period: 2010/8/1～2013/7/31, NSC)
4. 奈米螺旋碳管、填鐵奈米碳管製程及機電元件研製--子計畫一：奈米螺旋碳管、填鐵奈米碳管製程及機械性質量測，主持人，計畫期間：2010/8/1～2013/7/31，委託單位：國科會。(Synthesis of carbon nanocoils and Fe-filled carbon nanotube and their mechanical property measurements , period: 2010/8/1～2013/7/31, NSC)