曾任台大機械系助教、講師、台大機械系及材料所合聘副教授、教授、台大材料所所長、台大工業研究中心主任、國科會材料學門召集人、現任台大機械系及材料系合聘教授。

B. S. in National Taiwan University, 1972
M.S. in National Taiwan University, 1976
Ph.D. in University of Illinois at Urbana-Champaign, 1986

1. Cantor alloy 單相合金及衍生多相合金(工業級塊材與薄帶)組織—性質之開發研究(1/3)……子計畫三：FCC系統高熵合金中初期析出與制振能之研究，共同主持人，計畫期間：2016.08.01~2017.7.31，委託單位：科技部。(MOST106-2218-E-002-025)
2. 鈦鎳基形狀記憶合金先麻田散體變態特性之比較研究(1/2)(2/2)，主持人，計畫期間：2016.08.01~2018.07.31，委託單位：科技部。(MOST105-2221-E-002-043-MY2)
3. 紅外線同質/異質真空硬銲TiNiCu三元形狀記憶合金之研究(1/2)(2/2)，主持人，計畫期間：2016.08.01~2018.07.31，委託單位：科技部。(MOST105-2221-E-002-044-MY2)
4. 鈦鎳基形狀記憶合金巨觀及微觀尺度下性能之比較研究(2/2)，主持人，計畫期間：2015.08.01~2016.07.31，委託單位：科技部。(MOST104-2221-E-002-004)
   Comparison the Macro-and Micro-scale Properties of TiNi-based Shape Memory Alloy (2/2)
5. 使用阻絕層配合雙層異質填料進行紅外線硬銲異種合金 (2/2)，主持人，計畫期間：2015.08.01~2016.07.31，委託單位：科技部。(MOST104-2221-E-002-005)
   Infrared Brazing Dissimilar Alloys Using Barrier Layer with Two Different Braze Alloys (2/2)
6. 探索尖端材料在微奈米尺度下之新穎行為―子計畫三：富鈦TiNi形狀記憶合金箔片機械性質之研究，主持人，計畫期間：由2010.01.01至2016.7.31止，全程為五年，委託單位：台大五年五百億經費―優勢重點領域拔尖計畫。(105年度計畫編號：105R891803)
   Studies on Mechanical Properties of Ti-rich TiNi Shpae Memory Alloys Ribbons
7. 富鎳Ti48.7Ni51.3形狀記憶合金固溶時效之研究，主持人，計畫期間：2015.01.01~2015.12.31，委託單位：宗倬章先生教育基金會(台大慶齡工業研究中心)。(104-S-A04)
   Studies on Solid-Solution Treated and Aged Ni-rich Ti48.7Ni51.3 Shape Memory Alloy
8. 鈦鎳基形狀記憶合金巨觀及微觀尺度下性能之比較研究(1/2)，主持人，計畫期間：2014.08.01~2015.07.31，委託單位：科技部。(MOST103-2221-E-002-062)
   Comparison the Macro-and Micro-scale Properties of TiNi-based Shape Memory Alloy (1/2)
9. 使用阻絕層配合雙層異質填料進行紅外線硬銲異種合金 (1/2)，主持人，計畫期間：2014.08.01~2015.07.31，委託單位：科技部。(MOST103-2221-E-002-063)
   Infrared Brazing Dissimilar Alloys Using Barrier Layer with Two Different Braze Alloys (1/2)
10. 低溫度滯TiNiCu形狀記憶合金之研究，主持人，計畫期間：2014.07.01~2015.02.28，委託單位：科技部(大專生參與專題研究計畫)。(MOST103-2815-C-002-024-E)
    A Study on Low Temperature Hysteresis of TiNiCu Shape Memory Alloys
11. 極輕質高比強度鎂合金之研究(II)，共同主持人，計畫期間：2014.01.01~2014.12.31，委託單位：國科會國防科技研究計畫。(NSC103-2623-E-259-002-D)
    Studies on the High Specific Strength of Extra Light Magnesium Alloys(II)
12. TiNiCuFe四元形狀記憶合金麻田散體變態順序之研究，主持人，計畫期間：2013.07.01~2014.02.28，委託單位：國科會(大專生參與專題研究計畫)。(NSC102-2815-C-002-070-E)
    A Study on Martensitic Transformation Sequence of TiNiCuFe Quaternary Shape Memory Alloys
13. 極輕質高比強度鎂合金之研究，共同主持人，計畫期間：2013.01.01~2013.12.31，委託單位：國科會國防科技研究計畫。(NSC102-2623-E-259-001-D)
    Studies on the High Specific Strength of Extra Light Magnesium Alloys
14. 探索尖端材料在微奈米尺度下之新穎行為―子計畫三：富鈦TiNi形狀記憶合金箔片機械性質之研究，主持人，計畫期間：由2010.01.01至2016.7.31止，全程為五年，委託單位：台大五年五百億經費―優勢重點領域拔尖計畫。(103年度計畫編號：103R891803)
    Studies on Mechanical Properties of Ti-rich TiNi Shpae Memory Alloys Ribbons
15. Ti50Ni50-xZrx (x≤10 at.%)三元形狀記憶合金之研究，主持人，計畫期間：2012.07.01~2013.02.28，委託單位：國科會(大專生參與專題研究計畫)。(NSC101-2815-C-002-059-E)
    A Study on Ti50Ni50-xZrx (x≤10 at.%) Ternary Shape Memory Alloys
16. 形狀記憶合金性能最佳化之研究(1/3)~(3/3)―總計畫，主持人，計畫期間:2011.08.01~2014.07.31，委託單位：國科會。(NSC100-2221-E002-099-MY3)
    Properties Optimization of Shape Memory Alloys (1/3)~(3/3) (Integral Project)
17. 形狀記憶合金性能最佳化之研究―子計畫一：鈦鎳基形狀記憶合金性能最佳化之研究(1/3)~(3/3)，主持人，計畫期間：2011.08.01~2014.07.31，委託單位：國科會。(NSC100-2221-E002-100-MY3)
    Properties Optimization of TiNi-based Shape Memory Alloys (1/3)~(3/3) (Project I)
18. 紅外線異質真空硬銲鈦鎳形狀記憶合金之研究(1/3)~(3/3)，主持人，計畫期間：2011.08.01~2014.07.31，委託單位：國科會。(NSC100-2221-E002-102-MY3)
    The Study of Infrared Dissimilar Vacuum Brazing TiNi Shape Memory Alloy (1/3)~(3/3)

1. Shin-Han Chang and Shyi-Kaan Wu*, 2018, “Damping Characteristics of TiNi-based Shape Memory Alloys”, a chapter in the book “Handbook of Mechanics of Materials“, eds: Chun-Hway Hsueh, Siegfried Schmauder and Yutaka Kagawa, (In Press), Springer Nature Publiser. (MOST104-2221-E002-004 and NTU-105R891803)
2. Chih-Hsuan Chen, Hsin-Kai Wang and Shyi-Kaan Wu, 2018, “A Study on the Crystallization Behavior of Amorphous Ti50Ni25Cu25 Shape Memory Ribbon by X-ray Diffraction Measurement”, Intermetallics, Vol. 93, 347-354, USA. (SCI) (MOST105-2221-E002-043- MY2)
3. Ramachandran Balakrishnan, Pei-Chi Chang, Yung-Kang Kuo, Chen Chien, and Shyi-Kaan Wu, 2017, "Characteristics of Martensitic and Strain-Glass Transitions of the Fe-Substituted TiNi Shape Memory Alloys Probed by Transport and Thermal Measurements", Scientific Reports, 7：16336 (DOI:10.1038/s41598-017-16574-0), London. (SCI) (MOST105-2221- E002-043-MY2)(SKW) (MOST103-2112-M259-008-MY3)(YKK)
4. Shyi-Kaan Wu, Wei-Jyun Chan and Shih-Hang Chang, 2017, ”Damping Characteristics of Inherent and Intrinsic Internal Friction of Cu-Zn-Al Shape Memory Alloys”, Metals, Vol. 7, 397 (doi:10.3390/met7100397), Switzerland. (SCI) (MOST105-2221-E002-043-MY2) (Open Access)
5. Ren-Kae Shiue, Shyi-Kaan Wu*, Chun-Kai Liu and Chuan-Yu Dai, 2017, “Interfacial Reaction and Bonding Strength of Ti50Ni50 and Inconel 600 Dissimiar Brazed Joints”, Materials Transactions, Vol. 58, No. 9 (Sept.), 1308-1312, Japan. (SCI) (MOST105-2221-E002-044- MY2)
6. Ren-Kae Shiue, Shyi-Kaan Wu*, Sheng-Hao Yang and Chun-Kai Liu, 2017, “Infrared Dissimilar Joining of Ti50Ni50 and 316L Stainless Steel with Copper Layer in Between Two Silver-based Fillers”, Metals, Vol. 7, 276 (doi:10.3390/met7070276), Switzerland. (SCI) (MOST105-2221-E002-044-MY2) (Open Access)
7. Shih-Hang Chang, Keng-Hua Lin and Shyi-Kaan Wu*, 2017, “Effects of Cold-Rolling/Aging Treatments on the Shape Memory Properties of Ti49.3Ni50.7 Shape Memory Alloy”, Materials, Vol. 10, 704 (doi:10.3390/ma10070704), Switzerland. (SCI) (MOST105-2221-E002-043-MY2) (Open Access)
8. P. C. Chang, M. L. Ke, B. Ramachandran, Y. K. Kuo*, C. Chien and S. K. Wu, 2017, “Compartive Study of R-phase Martensitic Transformations in TiNi-based Shape Memory Alloys Induced by Point Defects and Precipitates”, Intermetallics, Vol. 84, 130-135, U.S.A. (SCI)(MOST105-2221-E002-043-MY2 and NTU105R891803)
9. Ren-Kae Shiue, Shyi-Kaan Wu* and Sheng-Hao Yang, 2017, “Infrared Brazing of Ti50Ni50 Shape Memory Alloy and Inconel 600 Alloy with Two Ag-Cu-Ti Active Braze Alloys”, Metallurgical and Materials Transactions A, Vol. 48, No. 2 (Feb.), 735-744, USA. (SCI)(MOST104-2221-E002-005 and NTU 105R891803)
10. S. K. Wu*, C. Chien and C. S. Yang, 2016, “Effects of Strain-Rate and Temperature on Mechanical Properties of Hot-Rolled Mg-14.3Li-0.8Zn β-phase Alloy”, Materials Transactions, Vol. 57, No. 3 (Nov.), 351-356, Japan. (SCI)(MOST104-2221-E002-004, and NTU-104R891803)
11. Chen Chien, Cheng-Si Tsao, Shyi-Kaan Wu*, Chun-Yu Chang, Pei-Chi Chang and Yung-Kang Kuo, 2016, “Characteristics of the Strain Glass Transition in As-quenched and 250ºC Early-Aged Ti48.7Ni51.3 Shape Memory Alloy”, Acta Materialia, Vol. 120 (Nov.), 159-167, Germany. (SCI)(MOST104-2221-E002-004, MOST105-2221-E002-043-MY2 and NTU-105R891803)
12. Shih-Han Chang, Chen Chien and Shyi-Kaan Wu*, 2016, “Damping Characteristics of the Inherent and Intrinsic Internal Friction of Ti50Ni50-xFex (x = 2, 3 and 4) Shape Memory Alloys”, Materials Transactions, Vol. 57, No.3 (Mar.), 351-356, Japan (SCI)(MOST104-2221-E002-004 and NTU104R891803)
13. Chai-Hsin Kuang, Chen Chien and Shyi-Kaan Wu*, 2015, “Multistage Martensitic Transformation in High Temperature Aged Ti48Ni52 Shape Memory Alloy”, Intermetallics, Vol. 67 (Dec.), 12-18, U.S.A. (SCI)(MOST103-2221-E002-062 and NTU-104R891803)
14. Chih-Hsuan Chen and Shyi-Kaan Wu*, 2015, “Observations of Self-accommodated R-phase Morphologies in a Ti50.3Ni48.2Fe1.5 Shape Memory Alloy”, Materials Characterization, Vol.107 (Sept.), 202-210, U.S.A. (SCI)(MOST103-2221-E002-062 and NTU-104R891803)
15. Ren-Kae Shiue, Shyi-Kaan Wu*, Chia-Pin Chen and Shen-Hao Yang, 2015, “Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Au-22Ni-8Pd Filler”, Gold Bulletin, 48 (Jun.), 57-62, England. (SCI)(MOST103-2221-E002-063)
16. Chih-Hsuan Chen, Hsin-Kai Wang and Shyi-Kaan Wu*, 2015,”Pseudoelasticity Response of Aged Ti50Ni25Cu25 Shape Memory Ribbon under Nanoindentation Tests”, Intermetallics, Vol.64 (Sept.), 78-85, U.S.A. (SCI)(MOST103-2221-E002-062 and NTU-104R891803)
17. Ren-Kae Shiue, Chia-Pin Chen and Shyi-Kaan Wu*, 2015, “Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Two Silver-based Fillers”, Metallurgical and Materials Transactions A, Vol.46 , Issue 6, 2364-2371, U.S.A. (SCI)(MOST 103-2221-E002-063)
18. Ramachandran Balakrishnan, Chun-Hung Chen, Pei-Chi Chang, Yung-Kang Kuo*, Chen Chien and Shyi-Kaan Wu, 2015, ”Thermal and Transport properties of As-grown Ni-rich TiNi Shape Memory Alloys Intermetallics”, Intermetallics, Vol.60 (May), 79-85, U.S.A. (SCI)(NSC100-2221-E002-100-MY3 and NTU-103R891803)
19. Nien-Ti Tsou*, Chih-Hsuan Chen, Chuin-Shan Chen and Shyi-Kaan Wu, 2015, “Classification and Analysis of Trigonal Martensite Laminate Twins in Shape Memory Alloys”, Acta Materialia, Vol.89 (May), 193-204, U.S.A. (SCI)(NTU-103R891803)
20. Chen Chien, Shyi-Kaan Wu* and Shih-Hang Chang, 2015, “Damping Capacities of Ti50Ni50-xCux Shape Memory Alloys Measured under Temperature, Strain and Frequency Sweeps”, Materials Transactions, Vol. 56,No. 2(Feb.), 193-199, Japan, (SCI)(MOST103-2221-E002-062 and NTU-103R891803)
21. Chiao-Yin Nien, Hsin-Kai Wang, Chih-Hsuan Chen, Seiichiro Ii, Shyi-Kaan Wu and Chun-Hway Hsueh*, 2014, “Superelasticity of TiNi-based Shape Memory Alloys at Micro-nano Scale”, J. Mater. Res., Vol. 29, No. 22(Nov.), 2717-2726, U.S.A. (SCI)(NTU-103R891803)
22. Chih-Hsuan Chen, Shyi-Kaan Wu* and Chun-Yu Lai, 2014, “The Characteristics of Precipitation Hardening and the Shape Memory Effect in Aged Ti50.6Ni39.4Cu9.8Si0.2 Shape Memory Ribbons”, Materials Science and Engineering A, Vol. 613(Sept.), 317-325, U.S.A. (SCI)(NSC100-2221-E002-100-MY3 and NTU-103R891803)
23. Chen Chien, Shyi-Kaan Wu* and Shih-Hang Chang, 2014, “Damping Capacities of Ti50Ni50-xCux Shape Memory Alloys Measured under Temperature, Strain and Frequency Sweeps”, Materials, Vol.7, Issue 6, 4574-4586, Switzerland, (SCI)(NSC100-2221-E002-100-MY3 and NTU-103R891803)
24. Fu-Cheng Yen, Kuen-Shyang Hwang and Shyi-Kaan Wu*, 2014, “Fabrication of Porous Ti-rich Ti51Ni49 by Evaporating NaCl Space Holder”, Metallurgical and Materials Transactions A, Vol. 45, No. 5(May), 2626-2635, U.S.A.(SCI)(NSC97-2221-E002-038-MY3, NSC100-2221-E002-100-MY3 and NTU-101R891803)
25. S. K. Wu*, C. Chien, C. S. Yang and H. Y. Bor, 2014, “The Portevin-Le Chatelier Effect in β-phase Mg-14.3Li-0.8Zn Alloy”, Materials Science and Engineering A, Vol.605(May), 33-38, U.S.A.(SCI)(NSC100-2221-E002-102-MY3, NSC102-2623-E259-100-D and NTU-102R891803)
26. C. H. Chen and S. K. Wu*, 2014, “Martensitic Transformation and Pseudoelasticity of Aged Ti50.1Ni49.7Si0.2 shape Memory Ribbon”, Materials Science and Engineering A, Vol. 593 (Jan.), 85-91, U.S.A. (SCI) (NSC100-2221-E002-100-MY3 and NTU 101R891803)
27. H. C. Lin*, S. K. Wu, Y. T. Peng and K. M. Lin, 2013, “Improvement of Pseudoelasticity in Fe-Mn-Si-Cr Alloy by Slight Tantalum Addition”, J. Alloys and Compounds, Vol. 577(Nov.), S338-S343, The Netherland. (SCI) (NSC100-2221-E002-100-MY3 and NSC100-2221-E002-101-MY3)
28. S. H. Chang and S. K. Wu*, 2013, “Determining Transformation Temperatures of Equiatomic TiNi Shape Memory Alloy by Dynamical Analysis Test”, J. Alloys and Compounds, Vol. 577(Nov.), S241-S244, The Netherland. (SCI) (NSC100-2221-E002-100-MY3)
29. S. H. Chang and S. K. Wu*, 2013, “Damping Characteristics of As-spun and Annealed Ti51Ni49 Ribbons Measured by Dynamic Mechanical Analysis”, J. Alloys and Compounds, Vol. 577(Nov.), S175-S178, The Netherland. (SCI) (NSC100-2221-E002-100-MY3)
30. R. K. Shiue, Y. H. Chang, S. K. Wu*, 2013, “Infrared Brazing Ti50Ni50 and Invar Using Ag-based Filler Foils”, Metallurgical and Materials Transactions A, Vol. 44, No. 10(Oct.), 4454-4460, U.S.A. (SCI) (NSC100-221-E002-102-MY3)
31. S. Y. Cheng, C. H. Chen and S. K. Wu*, 2013, “A Study of the Structure of G-P Zones in Ti-rich TiNi Shape Memory Melt-Spun Ribbons”, Philosophical Magazine, Vol. 93, No. 23, 3167-3176. England, (SCI) (NSC100-2221-E002-100-MY3 and NTU 101R891803)
32. B. Ramachandran, R. C. Tang, P. C. Chang, Y. K. Kuo*, C. Chien and S. K. Wu, 2013, “Cu-Substitution Effect on Thermoelectric Properties of the TiNi-based Shape Memory Alloy”, J. Appl. Phys., Vol. 113, 203702; doi:10.1063/1.4807397, U.S.A. (SCI) (NSC100-2221-E002-100-MY3 and NTU102R891803)
33. Shyi-Kaan Wu, Shih-Hang Chang* and Chen Chien, 2013, “Effect of Cold-Rolling on Damping Characteristics of Multi-Component Al-12%Si Alloy measured by Dynamic Mechanical Analyzer”, Materials Transactions, Vol. 54, No. 5, 738-744, Japan. (SCI) (NSC100-2623- E002-010-D and NSC100-2221-E002-100-MY3)
34. S. K. Wu*, Y. H. Li, K. T. Chien, C. Chien and C. S. Yang, 2013, “X-Ray Diffraction Studies on Cold-Rolled/Solid-Solution Treated α+β Mg-10.2Li-1.2Al-0.4Zn Alloy”, J. Alloys and Compounds, Vol. 563, 234-241, The Netherland. (SCI) (NSC100-2221- E002-099-MY3, NSC100-2623-E002-010-D and NTU101R891803)
35. C. H. Chen, S. Y. Cheng and S. K. Wu*, 2013, “Nanoindentation Studies on Precipitation Hardening of Ti-rich Ti50.4Ni49.5Si0.1 Shape Memory Ribbons”, Intermetallics, Vol. 36, 109-117, USA. (SCI) (NSC100-2221-E002-100-MY3 and NTU101R891803) 

國際會議論文 (International Conference Papers)：

1. Shih-Hang Chang, Shyi-Kaan Wu, Wei-Jyun Chan, Bo-Yen Huang, Yuan-Ting Tsao, Chin Kuo, Yuan-Chien Hsiao, 2017.11, “Inherent and intrinsic internal friction of Cu-Zn-Al shape memory alloys”, 18th Int’l Union of Mater. Res. Soc.─Int’l Conf. in Asia 2017 (IUMRS-ICA 2017), Nov. 5-9, 2017, Taipei, Taiwan. (No. F1-P13, p.129)
2. Chih-Hsuan Chen, Yen-Cheng Wang, Shyi-Kaan Wu, Yue-Jin Chen, 2017.11, “Transformation Behaviors and Shape Memory Properties of Ti-rich TiNi Shape Memory Ribbons”, 18th Int’l Union of Mater. Res. Soc.─Int’l Conf. in Asia 2017 (IUMRS-ICA 2017), Nov. 5-9, 2017, Taipei, Taiwan. (No. D7-P19, p.103)
3. Ren-Kae Shiue, Shyi-Kaan Wu, Chuan-Yu Dai and Chieh Lin, 2017.11, “The Study of Infrared Vacuum Brazing Ti50Ni40Cu10 and Ti50Ni30Cu20 Shape Memory Alloys”, 18th Int’l Union of Mater. Res. Soc.─Int’l Conf. in Asia 2017 (IUMRS-ICA 2017), Nov. 5-9, 2017, Taipei, Taiwan. (No. D7-P17, p.103)
4. Bo-Yi Li, Chieh Lin, Shyi-Kaan Wu and Yi-Ching Chang, 2017.11, “Martensitic transformation Characteristics of 600 ºC Aged Ni-rich Ti50-xNi50+x (1.1≦x≦2) Shape Memory Alloys”, 18th Int’l Union of Mater. Res. Soc.─Int’l Conf. in Asia 2017 (IUMRS-ICA 2017), Nov. 5-9, 2017, Taipei, Taiwan. (No. D7-P03, p.102)
5. Shyi-Kaan Wu and Yung-Chien Huang, 2017.11, “The Comparison on the Characteristics of B19 and R-phase Premartensitic Transformations in TiNi-based Shape Memory Alloys”, 18th Int’l Union of Mater. Res. Soc.─Int’l Conf. in Asia 2017 (IUMRS-ICA 2017), Nov. 5-9, 2017, Taipei, Taiwan. (No. D7-P18, p.103)
6. Wei-Jyun Chan, Shyi-Kaan Wu, Yu-Ning Lee and Shih-Hang Chang, 2017.07, “Inherent and Intrinsic Internal Friction of Cu-28Zn-3.5Al Shape Memory Alloy Measured under Isothermal Conditions”, International Conf. on Martensitic Transformation 2017 (ICOMAT-2017), Jul. 10-14, 2017, Chicago, USA.
7. Shyi-Kaan Wu, Yu-Ning Lee, Bo-Yen Huang and Shih-Hang Chang, 2017.07, “Damping Characteristics of the Inherent and Intrinsic Internal Friction of Ti50Ni40Pd10 Shape Memory Alloy”, International Conf. on Martensitic Transformation 2017 (ICOMAT-2017), Jul. 10-14, 2017, Chicago, USA.
8. Chih-Hsuan Chen, Hsin-Kai Wang and Shyi-Kaan Wu, 2017.07, “XRD and EBSD Studies on the Microstructural Evolution and Crystallization Behavior of Amorphous Ti50Ni25Cu25 Shape Memory Ribbon”, International Conf. on Martensitic Transformation 2017 (ICOMAT-2017), Jul. 10-14, 2017, Chicago, USA.
9. Yung-Chien Huang, Cheng-Si Tsao and Shyi-Kaan Wu, 2017.07, “In-situ SAXS Study on the Evolution of Nanodomains in 250 oC Early-aged Ti48.7Ni51.3 Strain Glass”, International Conf. on Martensitic Transformation 2017(ICOMAT-2017), Jul. 10-14, 2017, Chicago, USA.
10. Shih-Hang Chang, Shyi-Kaan Wu and Yu-Ning Lee, “Low Frequency Damping Properties of Ti50Ni50-xPdx (x = 5, 7, 10 and 13) Shape Memory Alloys”, International Workshop on Advanced Materials 2016 (IWAM 2016), Mar. 27-31, 2016, Yangzhou, China.
11. Chih-Hsuan Chen and Shyi-Kaan Wu, 2016.03, “The Characteristics of Nelt-spun Ribbons of Ti-rich TiNiSi Shape Memory Alloys”, International Workshop on Advanced Materials 2016 (IWAM 2016), Mar. 27-31, 2016, Yangzhou, China.
12. Hsin-Kai Wang, Chih-Hsuan Chen and Shyi-Kaan Wu, 2015.08, “Transformation Behavior and Pseudoelasticity of Aged Ti50Ni25Cu25 Shape Memory Ribbon”, (ASEM15) with mini-symp. on Shape Memory Alloys in ICSSS15, Aug. 25-29, 2015, Incheon, Korea.
13. Shyi-Kaan Wu, Ren-Kae Shiue and Chia-Pin Chen, 2015.05, “Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Silver-based Fillers”, International Conf. on Shape Memory and Superelastic Technologies (SMST-2015), May 18-22, 2015, Oxfordshire, England.
14. Sheng-Hao Yang, Chia-Pin Chen, Ren-Kae Shiue and Shyi-Kaan Wu, 2015.01, “Infrared Brazing of 316L Stainless Steel and Ti50Ni50 Shape Memory Alloy”, The 2nd JWRI-MSE (Japan-Taiwan) Workshop on Materials Design and Joining, Jan. 7-8, Taipei, Taiwan.
15. Shih-Hang Chang, Shyi-Kaan Wu and Jun-Xiang Lin and Chih-Hsuan Chen, 2014.07, ”Toxicity Assessment and Selective Leaching Properties of Cu-Al-Ni Shape Memory Alloys” Int’l Conf. of Martensitic Transformations, 2014(ICOMAT-2014), July. 6-11, Bilbao, Spain.
16. Chih-Hsuan Chen and Shyi-Kaan Wu and Shih-Hang Chang, 2014.07, “Martensitic Transformation and the Shape Memory Effect in Aged Ti50.6Ni39.4Cu9.8Si0.2 Melt-spun Ribbons”, Int’l Conf. of Martensitic Transformations, 2014(ICOMAT-2014), July. 6-11, Bilbao, Spain.
17. Chen Chien, Shyi-Kaan Wu and Shih-Hang Chang, 2014.07, “Damping Properties of Ti50Ni50-xCux(x=0~30 at.%) Shape Memory Alloys”, Int’l Conf. of Martensitic Transformations, 2014(ICOMAT-2014), July. 6-11, Bilbao, Spain.
18. Chen Chien, Shyi-Kaan Wu and Shih-Hang Chang, 2014.06, “Damping Characteristics of Ti50Ni50-xCux(x=0~30 at.%) Shape Memory Alloys at Low Frequency”, Int’l Union of Mater. Res. Soc.-Int’l Conf. on Electronic Mater., 2014(IUMRS-ICEM 2014), Jun 10-13, Taipei, Taiwan.
19. Chih-Hsuan Chen and Shyi-Kaan Wu, 2014.06, “Electron Backscattering Diffraction Studies on Self-accommodation of R-phase in a Ti50.3Ni48.2Fe1.5 Ternary Shape Memory Alloy.”, Int’l Union of Mater. Res. Soc.-Int’l Conf. on Electronic Mater., 2014(IUMRS-ICEM 2014), Jun 10-13, Taipei, Taiwan.
20. Chia-Pin Chen, Ren-Kae Shiue and Shyi-Kaan Wu, 2014.06, “Brazing 316L Stainless Steel and Ti50Ni50 with Au-based Fillers”, Int’l Union of Mater. Res. Soc.-Int’l Conf. on Electronic Mater., 2014(IUMRS-ICEM 2014), Jun 10-13, Taipei, Taiwan.
21. Ren-Kae Shiue, Yong-Hsing Chang and Shyi-Kaan Wu, 2013.05, “Brazing TiNi Shape Memory Alloy and Invar Alloy Using Ag-based Filler Foils”, The First JWRI-MSE (Japan-Taiwan) Workshop on Materials Design and Joining, May 23-24, Osaka, Japan.
22. S. H. Chang, S. K. Wu and C. H. Chiang, 2013.05, “Toxicity of Metal Ions Selectively Leached From TiNi Shape Memory Alloys Determined by Escherichia Coli DH5a”, 2013 Shape Memory and Superelastic Technologies Conf. (SMST-2013), May 20-24, Prague, Czech Republic.
23. C. H. Chen, S. K. Wu, and S. Y. Cheng, 2013.05, “Nanoindentation Studies on Precipitation Hardening of Ti-rich TiNi Shape Memory Ribbons”, 2013 Shape Memory and Superelastic Technologies Conf. (SMST-2013), May 20-24, Prague, Czech Republic.

國內會議論文 (Domestic Conference Papers)：

1. 李柏毅，蘇哲萱，吳錫侃，張珮琦，郭永綱，2017.12，”固溶處理之Ti50-xNi50+x (x = 1.0~1.3 at.%)形狀記憶合金的變態行為及熱物理/制振能性質之研究”，2017年台灣金屬熱處理學會年會暨論文研討會，台南(本論文獲大會論文佳作獎)。
2. S. H. Chang, S. K. Wu and C. K. Hou, 2016.11, “Texture on Cold-Rolled/Solid-Solution Treated Mg-14.3Li-0.8Zn β–Phase Alloy”, Proc. of 2016 Annual Conf. of Taiwan Soc. for Materials Sci. (中國材料科學學會), Hsinchu.
3. Y. C. Huang, S. K. Wu and C. S. Tsao, 2016.11, “Kinetics of Phase Transformation of 250 Isothermal-aged Ti48.7Ni51.3 Strain Glass: In-situ SAXS Study”, Proc. of 2016 Annual Conf. of Taiwan Soc. for Materials Sci. (中國材料科學學會), Hsinchu.
4. 李宥寧，吳錫侃，林杰，2016.11，”三元Ti50Ni50-XPdX形狀記憶合金變態特性與制振能之研究” ，中國材料科學學會2016年年會論文集，新竹。
5. 李宥寧，吳錫侃，李柏毅，2016.11，”二元Ti50-XNi50+X (X = 0～1.6 at.%)形狀記憶合金變態特性與制振能之研究” ，中國材料科學學會2016年年會論文集，新竹。
6. 劉峻愷，薛人愷，吳錫侃，戴傳諭，2016.11，”紅外線接合Ti50Ni50形狀記憶合金與Inconel 600合金”，中國材料科學學會2016年年會論文集，新竹。
7. 劉峻愷，薛人愷，吳錫侃，戴傳諭，2016.11，”三層填料紅外線硬銲接合Ti50Ni50形狀記憶合金與Incoloy 800合金”，中國材料科學學會2016年年會論文集，新竹。
8. 匡載訢，簡甄，吳錫侃，2015.12，”時效對Ti48Ni52行狀記憶合金相變態行為及全方位形狀記憶效應影響之研究”，2015年台灣金屬熱處理學會年會暨論文研討會，台中。
9. 楊昇豪，薛人愷，吳錫侃，劉峻愷，2015.11，”三層填料紅外線硬銲接合Ti50Ni50形狀記憶合金與316L不鏽鋼”， 中國材料科學學會2015年年會論文集，高雄。
10. 楊昇豪，薛人愷，吳錫侃，劉峻愷，2015.11，”銀基填料紅外線硬銲接合Ti50Ni50形狀記憶合金與Inconel 600合金”， 中國材料科學學會2015年年會論文集，高雄。
11. 匡載訢，簡甄，吳錫侃，李宥寧，2015.11，”時效對Ti48.5Ni41.5Cu10形狀記憶合金變態特性之研究”，中國材料科學學會2015年年會論文集，高雄。
12. Shih-Hang Chang, Chen Chien and Shyi-Kaan Wu, 2015.11, “Damping Characteristics of the Inherent Internal Friction of Ti50Ni50-xFex Shape Memory Alloys”, Proc. of 2015 Annual Conf. of Taiwan Soc. for Materials Sci., Kaohsiung.
13. Chen Chien, Cheng-Si Tsao and Shyi-Kaan Wu, 2015.11, “A Study of Strain Glass Nanostructure in Ni-rich Ti48.7Ni51.3 Alloy by Small-angle X-ray Scattering Technique”, Proc. of 2015 Annual Conf. of Taiwan Soc. for Materials Sci., Kaohsiung.
14. Hsin-Kai Wang, Chih-Hsuan Chen, Shyi-Kaan Wu and Yen-Cheng Wang, 2015.11, “Transformation Behavior and Pseudoelasticity of Aged Ti50Ni25Cu25 Shape Memory Ribbon”, Proc. of 2015 Annual Conf. of Taiwan Soc. for Materials Sci., Kaohsiung.
15. 簡甄，李宗縉，吳錫侃，2014.12，”Ti51Ni48Si1形狀記憶合金熱處理之研究”， 2014年台灣金屬熱處理學會年會暨論文研討會，高雄。(本論文獲大會論文佳作獎)
16. 吳錫侃，2014.09，”奈米壓痕量測在TiNi形狀記憶合金上之應用”，奈米機械性質前瞻量測技術探討及應用研討會，台大，台北。
17. 楊智盛，簡甄，吳錫侃，2013.11，”熱機處理對極輕質LAZ1110鎂鋰合金機械性質影響之研究”，2013年台灣金屬熱處理學會年會暨論文研討會，台北。
18. 何建陞，簡甄，吳錫侃，2013.10，”時效對富鎳Ti48.7Ni51.3及Ti48.4Ni51.6形狀記憶合金性能最佳化之研究”，2013年中國材料科學學會年會論文集，桃園。
19. 何建陞，簡甄，吳錫侃，2013.10，” 富鎳Ti48.7Ni51.3及Ti48.4Ni51.6形狀記憶合金時效後之相變態與硬度之研究”，2013年中國材料科學學會年會論文集，桃園。
20. 楊智盛，吳錫侃，王昕愷，2013.10，”不同應變速率對LZ141鎂鋰合金機械性質影響之研究”，2013年中國材料科學學會年會論文集，桃園。
21. 楊智盛，吳錫侃，王昕愷，2013.10，” LZ141鎂鋰合金Portevin–Le Châtelier效應之研究”，2013年中國材料科學學會年會論文集，桃園。
22. 賴俊宇，陳志軒，吳錫侃，李宗縉，2013.10，”Ti50.61Ni39.39Cu9.83Si0.17形狀記憶合金箔帶之結晶溫度及和活化能之研究”，2013年中國材料科學學會年會論文集，桃園。
23. 賴俊宇，陳志軒，吳錫侃，李宗縉，2013.10，” Ti50.56Ni39.38Cu9.83Si0.23形狀記憶合金箔帶時效後硬度及形狀記憶效應之研究”，2013年中國材料科學學會年會論文集，桃園。
24. 張永興，薛人愷，吳錫侃，陳嘉彬，2013.10，”使用異質填料紅外線硬銲接合Ti50Ni50與Invar合金”， 2013年中國材料科學學會年會論文集，桃園。
25. 張永興，薛人愷，吳錫侃，陳嘉彬，2013.10，” 銀基填料紅外線硬銲接合Ti50Ni50與Invar合金”，2013年中國材料科學學會年會論文集，桃園。
26.  

其他 (Other Publication)：

1. Shyi-Kaan Wu, 2016, Report on “Mechanical Properties of Ti-rich Shape Memory Alloys’Ribbons”, Sub-project 3 of Excellent Research Program “Exploring Micro-Nano Scale Mechanical Properties of Cutting-Edge Matrerials”, National Taiwan University. (NTU105R891803)
2. 吳錫侃，2016，”富鎳Ti48.7Ni51.3形狀記憶合金固溶時效之研究”，104年度宗倬章先生教育基金會補助計畫(104-S-A04)，台北。
3. 簡甄、李宗縉、吳錫侃，2015，”Ti51Ni48Si1三元形狀記憶合金熱處理之研究”，金屬熱處理，第126期，p.23-30，台北。
4. 吳錫侃、黃宏絃(黃詠騫)，2015，”低溫度滯TiNiCu形狀記憶合金之研究”， 國科會大學生專題研究報告(MOST103-2815-C-002-024-E)，台北。(本報告整理之論文獲中國工程師學會學生分會”104年度工程論文競賽”材料組”佳作獎”)
5. 吳錫侃、吳君蘭，2014，”TiNiCuFe四元形狀記憶合金麻田散體變態順序之研究”，國科會大學生專題研究報告(NSC102-2815-C-002-070-E)，台北。
6. 王建義、吳錫侃、楊智盛，2013，”極輕質高比強度鎂合金之研究”，國科會國防科技學術合作研究計畫報告(NSC102-2623-E-259-001-D)，花蓮。
7. 吳錫侃、匡載昕，2013，”Ti50Ni50-xZrx(x≤10 at.%)三元形狀記憶合金之研究”，國科會大學生專題研究報告(NSC101-2815-C-002-059-E)，台北。(本報告整理之論文獲中國工程師學會學生分會”102年度工程論文競賽”材料組”佳作獎”)
8. 吳錫侃、李宗縉，2012，”Ti50Ni50-xCux(x=5~15 at.%)三元形狀記憶合金性能之研究”，國科會大學生專題研究報告(NSC100-2815-C-002-028-E)，台北。

榮譽事項 (Honors)：

1. 2009年中國材料科學學會首屆會士 (Fellow)。
2. 臺大終身職特聘教授。